LSB51 Emergency Stop Button Lockout, Bottom Hole 28 mm, Height 60 mm
Code: LSB51
Polycarbonate emergency stop button cover with a 28 mm bottom hole, 51.7 mm diameter and 60 mm height. It is designed for Siemens emergency stop switches or emergency stop switches with shields in tight locations, and can be locked by 2 people at the same time. In lockout/tagout practice, electrical lockouts prevent switches, buttons or plugs from being operated or connected while equipment is isolated for maintenance.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Polycarbonate, withstands -20°C to +120°C
- Designed for Siemens emergency stop switches or shielded emergency stops in tight locations
- Can be locked by 2 people at the same time
- Suitable for chemical, food, pharmaceutical and similar settings
Technical specifications
| Bottom hole diameter | 28 mm |
|---|---|
| Diameter | 51.7 mm |
| Height | 60 mm |
| Material | Polycarbonate (PC) |
| Operating temperature | -20°C to +120°C |
| Padlock capacity | 2 |
Used in
ChemicalFoodPharmaceutical
BUYER'S GUIDE
Choosing Electrical and Pneumatic Lockouts
These devices isolate plugs, wall switches, push buttons, emergency stops and air supply connections that cannot be locked with a breaker or valve lockout.
- Measure plug size and cable diameter before choosing a plug lockout.
- Switch and push-button covers must fit the panel cut-out and leave no way to operate the control.
- For pneumatic lines, lock the quick-disconnect and release stored pressure before work.
- Isolating a control circuit alone is not energy isolation; lock the main energy source whenever the procedure requires it.
Summarised from the manufacturer's catalogue and the general requirements for lockout devices in OSHA 29 CFR 1910.147. Device selection must follow your written energy isolation procedure and site risk assessment.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| LSB51 Emergency Stop Button Lockout, Bottom Hole 28 mm, Height 60 mm LSB51 |
— | — | — | This product |
| LB01 Emergency Stop Lockout, Inner Diameter 22 mm LB01 |
— | 26 g | — | View |
| LB02 Emergency Stop Lockout, Inner Diameter 30 mm LB02 |
— | — | — | View |
| LB01M Emergency Stop Lockout, Inner Diameter 25 mm LB01M |
— | 19 g | — | View |
| LS2151 Emergency Stop Lockout Set, Transparent PC, 22 mm and 31 mm LS2151 |
— | 50 g | — | View |
| LB04 Yellow Emergency Stop Lockout, Height 36 mm, Diameter 22 mm LB04YELLOW |
— | 24 g | — | View |
| LB05 Emergency Stop Lockout, Hole Diameter 22 mm LB05 |
— | — | — | View |
| LB06 Emergency Stop Lockout, Hole Diameter 30 mm LB06 |
— | — | — | View |
| LB07 Emergency Stop Lockout, Hole 22 mm, Inner Height 35 mm LB07 |
— | — | — | View |
More in this family
Technical data from the manufacturer's catalogue, page 40. Specifications may change; please confirm with our team before ordering.
