ELITE Full Body Harness with Ventral D-Ring and Padded Work Positioning Belt, 4-Point Attachment
Code: AFH300215
EN 361:2002EN 358:2018EN 813:2008
ELITE full body harness with a rear D-ring, front and ventral fall arrest D-rings and a padded work positioning waist belt with side D-rings, with 6-point adjustment and 4 attachment points. It is certified as a full body harness, positioning belt and sit harness. It uses ED coated aluminum and steel components and an integrated Compass asset management label pack.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Attachment points on Rear D-Ring, Front and Ventral Fall arrest D-Rings
- Adjustable shoulder and leg straps
- Padded work positioning waist belt with side D-Rings
Technical specifications
| Webbing | Polyester |
|---|---|
| Metal components | ED Coated Aluminum & Steel |
| Padding | Comfort pad made up of mesh Insushield and Matty |
| Adjustment points | 6-Point |
| Attachment points | 4-Point |
| D-rings | Rear D-ring, front fall arrest D-ring, ventral fall arrest D-ring, side D-rings |
| Size | M-L |
| Weight | 2.876 kg |
| Standards | EN 361:2002, EN 358:2018, EN 813:2008 |
BUYER'S GUIDE
Choosing, Wearing and Inspecting a Full Body Harness
The full body harness is the body support part of an active fall arrest system. It spreads the impact forces across the body during a fall and keeps the fallen worker suspended upright, while still giving enough freedom of movement to do the job safely.
- Pick the attachment points for the task: the dorsal D-ring between the shoulder blades is for fall arrest, the sternal D-ring is for guided type fall arresters when climbing or entering a confined space, the lateral D-rings are for work positioning only, and the ventral point is for rope access and rescue.
- Fall arrest attachment points are marked with an 'A' label; 'A/2' means two similar points must be used together as one attachment point.
- Shoulder rescue loops or D-rings take a spreader bar for confined space entry, exit and retrieval.
- Check the size against the height and weight chart, then put the harness on by holding it from the dorsal D-ring, closing the chest, waist and leg buckles and adjusting every strap to fit.
- Inspect before every use: labels intact and legible, D-rings and buckles undamaged and clicking when engaged, impact indicator not released, and webbing free of cuts, frays, burns, mould or discolouration.
- Have the harness examined by the manufacturer or an authorised representative at least every 12 months (EN 365), and withdraw it from use once it has arrested a fall.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| ELITE Full Body Harness with Ventral D-Ring and Padded Work Positioning Belt, 4-Point Attachment AFH300215 |
EN 361:2002, EN 358:2018, EN 813:2008 | 2.876 kg | — | This product |
| EPIC Riggers Harness AFH300401 |
EN 361:2002, EN 1497:2007 | 1.787 kg | — | View |
| EPIC Construction Harness AFH300402 |
EN 361:2002, EN 358:2018, EN 1497:2007 | 2.227 kg | — | View |
| EPIC Wind Harness AFH300403 |
EN 361:2002, EN 358:2018, EN 1497:2007 | 2.266 kg | — | View |
| EPIC Tower Harness AFH300405 |
EN 361:2002, EN 358:2018, EN 1497:2007 | 3.064 kg | — | View |
| EPIC Derrickman's Harness AFH300409 |
ANSI Z359.11-2014, EN 1497:2007 | 3.3 kg | — | View |
| EPIC Derrickman's Lite Harness AFH300410 |
ANSI Z359.11-2014, EN 1497:2007 | 3.1 kg | — | View |
| EPIC Miners Harness AFH300411TB |
ANSI Z359.11-2021, EN 1497:2007 | 3.3 kg | — | View |
| ELITE Full Body Harness, 2-Point Attachment, Elasticated Upper Webbing AFH300206 |
EN 361:2002, EN 1497:2007 | 1.23 kg | — | View |
More in this family
Technical data from the manufacturer's catalogue, page 38. Specifications may change; please confirm with our team before ordering.
