EPIC Riggers Harness
Code: AFH300401
EN 361:2002EN 1497:2007
The EPIC Riggers Harness is a full body harness with a rear dorsal and front fall arrest D-ring, 5-point adjustment and 2 attachment points. The EPIC series is ergonomically designed with AirLite padding, using breathable foam and fabric to keep the user cooler for longer, and lightweight aluminum fittings. Endure Guard technology gives liquid protection against oil, dirt and water, and the label pack integrates Compass asset management.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- AirLite shoulder padding
- Aluminum Rear Dorsal D-Ring and Front Fall arrest D-Ring
- Fall arrest extension strap
- Fall indicators
- Suspension trauma straps
- Aluminum quick connect buckles
- Confined Space Loops
- Endure guard webbing
Technical specifications
| Webbing | Polyester |
|---|---|
| Metal components | Aluminum |
| Padding | Comfort pad made up of Air mesh Insushield and Matty |
| Adjustment points | 5-Point |
| Attachment points | 2-Point |
| D-rings | Aluminum rear dorsal D-ring, front fall arrest D-ring |
| Buckles | Aluminum quick connect buckles |
| Size | M-L |
| Weight | 1.787 kg |
| Standards | EN 361:2002, EN 1497:2007 |
BUYER'S GUIDE
Choosing, Wearing and Inspecting a Full Body Harness
The full body harness is the body support part of an active fall arrest system. It spreads the impact forces across the body during a fall and keeps the fallen worker suspended upright, while still giving enough freedom of movement to do the job safely.
- Pick the attachment points for the task: the dorsal D-ring between the shoulder blades is for fall arrest, the sternal D-ring is for guided type fall arresters when climbing or entering a confined space, the lateral D-rings are for work positioning only, and the ventral point is for rope access and rescue.
- Fall arrest attachment points are marked with an 'A' label; 'A/2' means two similar points must be used together as one attachment point.
- Shoulder rescue loops or D-rings take a spreader bar for confined space entry, exit and retrieval.
- Check the size against the height and weight chart, then put the harness on by holding it from the dorsal D-ring, closing the chest, waist and leg buckles and adjusting every strap to fit.
- Inspect before every use: labels intact and legible, D-rings and buckles undamaged and clicking when engaged, impact indicator not released, and webbing free of cuts, frays, burns, mould or discolouration.
- Have the harness examined by the manufacturer or an authorised representative at least every 12 months (EN 365), and withdraw it from use once it has arrested a fall.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| EPIC Riggers Harness AFH300401 |
EN 361:2002, EN 1497:2007 | 1.787 kg | — | This product |
| EPIC Construction Harness AFH300402 |
EN 361:2002, EN 358:2018, EN 1497:2007 | 2.227 kg | — | View |
| EPIC Wind Harness AFH300403 |
EN 361:2002, EN 358:2018, EN 1497:2007 | 2.266 kg | — | View |
| EPIC Tower Harness AFH300405 |
EN 361:2002, EN 358:2018, EN 1497:2007 | 3.064 kg | — | View |
| EPIC Derrickman's Harness AFH300409 |
ANSI Z359.11-2014, EN 1497:2007 | 3.3 kg | — | View |
| EPIC Derrickman's Lite Harness AFH300410 |
ANSI Z359.11-2014, EN 1497:2007 | 3.1 kg | — | View |
| EPIC Miners Harness AFH300411TB |
ANSI Z359.11-2021, EN 1497:2007 | 3.3 kg | — | View |
| ELITE Full Body Harness, 2-Point Attachment, Elasticated Upper Webbing AFH300206 |
EN 361:2002, EN 1497:2007 | 1.23 kg | — | View |
| ELITE Full Body Harness, 2-Point Attachment, with 300mm Extension Strap AFH300203 |
EN 361:2002, EN 1497:2007 | 1.23 kg | — | View |
More in this family
Technical data from the manufacturer's catalogue, page 29. Specifications may change; please confirm with our team before ordering.
