ELEMENT ElectWorX Dielectric Full Body Harness with Work Positioning Belt, 3-Point Attachment
Code: AFH300707
EN 361:2002EN 358:2018
ElectWorX full body harness with rear D-ring, lateral and front webbing loops, a padded work positioning belt with side D-rings and hardware coated for a dielectric property of 20kV, with 5-point adjustment and 3 attachment points. The ElectWorX range uses non-conductive fittings for work where electrical hazards may be present, and is ideally used by utilities and overhead line teams on live wires to protect the user from electrical discharge.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Attachment points on Rear D-Ring, Lateral and Front webbing loops
- Lanyard keepers
- Coated hardware for dielectric property 20kV
- Padded work positioning belt with side D-Rings
- Adjustable shoulder, chest, waist and leg straps
Technical specifications
| Webbing | Polyester |
|---|---|
| Metal components | Steel core with reinforced Polymer molded (20kV Dielectric) |
| Padding | Comfort pad made up of mesh Insushield and Matty |
| Adjustment points | 5-Point |
| Attachment points | 3-Point |
| D-rings | Rear D-ring, lateral and front webbing loops, side D-rings on belt |
| Size | M-L |
| Weight | 2.243 kg |
| Standards | EN 361:2002, EN 358:2018 |
Used in
UtilitiesOverhead line work on live wires
BUYER'S GUIDE
Choosing, Wearing and Inspecting a Full Body Harness
The full body harness is the body support part of an active fall arrest system. It spreads the impact forces across the body during a fall and keeps the fallen worker suspended upright, while still giving enough freedom of movement to do the job safely.
- Pick the attachment points for the task: the dorsal D-ring between the shoulder blades is for fall arrest, the sternal D-ring is for guided type fall arresters when climbing or entering a confined space, the lateral D-rings are for work positioning only, and the ventral point is for rope access and rescue.
- Fall arrest attachment points are marked with an 'A' label; 'A/2' means two similar points must be used together as one attachment point.
- Shoulder rescue loops or D-rings take a spreader bar for confined space entry, exit and retrieval.
- Check the size against the height and weight chart, then put the harness on by holding it from the dorsal D-ring, closing the chest, waist and leg buckles and adjusting every strap to fit.
- Inspect before every use: labels intact and legible, D-rings and buckles undamaged and clicking when engaged, impact indicator not released, and webbing free of cuts, frays, burns, mould or discolouration.
- Have the harness examined by the manufacturer or an authorised representative at least every 12 months (EN 365), and withdraw it from use once it has arrested a fall.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| ELEMENT ElectWorX Dielectric Full Body Harness with Work Positioning Belt, 3-Point Attachment AFH300707 |
EN 361:2002, EN 358:2018 | 2.243 kg | — | This product |
| EPIC Riggers Harness AFH300401 |
EN 361:2002, EN 1497:2007 | 1.787 kg | — | View |
| EPIC Construction Harness AFH300402 |
EN 361:2002, EN 358:2018, EN 1497:2007 | 2.227 kg | — | View |
| EPIC Wind Harness AFH300403 |
EN 361:2002, EN 358:2018, EN 1497:2007 | 2.266 kg | — | View |
| EPIC Tower Harness AFH300405 |
EN 361:2002, EN 358:2018, EN 1497:2007 | 3.064 kg | — | View |
| EPIC Derrickman's Harness AFH300409 |
ANSI Z359.11-2014, EN 1497:2007 | 3.3 kg | — | View |
| EPIC Derrickman's Lite Harness AFH300410 |
ANSI Z359.11-2014, EN 1497:2007 | 3.1 kg | — | View |
| EPIC Miners Harness AFH300411TB |
ANSI Z359.11-2021, EN 1497:2007 | 3.3 kg | — | View |
| ELITE Full Body Harness, 2-Point Attachment, Elasticated Upper Webbing AFH300206 |
EN 361:2002, EN 1497:2007 | 1.23 kg | — | View |
More in this family
Technical data from the manufacturer's catalogue, page 42. Specifications may change; please confirm with our team before ordering.
