One Side Openable Swivel Assembly
Code: AFX200632
EN 354:2010PPE-R/11.135 V3
A swivel assembly for rope access and rescue rigging that opens on one side, with anodized aluminum and a polished stainless steel threaded locking pin. It has a breaking strength of 23 kN.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Anodizing colours may vary
Technical specifications
| Material | Pulley- Anodized Aluminum; Threaded Locking Pin- Stainless Steel Polished |
|---|---|
| Breaking strength | 23 kN |
| Finish | Natural Silver / Colored Anodized |
| Weight | 155 gm ± 10 gm |
| Standards | EN 354:2010, PPE-R/11.135 V3 |
BUYER'S GUIDE
Rope Access, Suspension Work and Rescue
Rope access, or industrial climbing, is a form of work positioning that uses ropes, pulleys, karabiners and rigging plates to reach difficult locations without scaffolding, cradles or aerial work platforms. Rope rescue is used in an emergency to retrieve a person who has fallen and is suspended in a harness.
- Use rope access only where traditional access systems cannot be installed, and always together with a fall protection system.
- Suspension work needs a full body harness with two attachment points, a primary for suspension and a secondary backup; the ventral (waist) points are best for suspension and a seat may be needed for long periods.
- Use anchor points rated to 12kN, or a tripod or davit system, for suspension work.
- Plan rescue before work starts: a rescue system must raise or lower the casualty with no free fall, and the rescuer needs a backup fall arrest system on anchors rated to 15 kN.
- Pre-assembled rope rescue kits give trained personnel a fast way to rescue a casualty from tower cranes, container cranes, wind turbines, ladders, lanyards, safety lines or inertia reels.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| One Side Openable Swivel Assembly AFX200632 |
EN 354:2010, PPE-R/11.135 V3 | 155 gm ± 10 gm | — | This product |
| Both Side Openable From Top Swivel Assembly AFX200630 |
EN 354:2010, PPE-R/11.135 V3 | 221 gm ± 10 gm | — | View |
| Both Side Openable From Side Swivel Assembly AFX200633 |
EN 354:2010, PPE-R/11.135 V3 | 210 gm ± 10 gm | — | View |
| Swivel Assembly AFX200631 |
EN 354:2010, PPE-R/11.135 V3 | 135 gm ± 10 gm | — | View |
More in this family
Technical data from the manufacturer's catalogue, page 136. Specifications may change; please confirm with our team before ordering.
