Double Pulley with Two Side Attachment
Code: AFX206016
EN 12278:2007
A rope access and rescue pulley with an aluminum alloy body and stainless steel sheave, for use on 10mm to 13mm diameter kernmantle rope. It has a breaking strength of 45 kN.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Anodizing colours may vary
Technical specifications
| Body material | Aluminum Alloy |
|---|---|
| Sheave material | Stainless Steel |
| Breaking strength | 45 kN |
| Works on | 10mm to 13mm dia Kernmantle Rope |
| Finish | Body- Coloured Anodized; Sheave- Electro Polished |
| Weight | 437.0 gms±20 gms |
| Standards | EN 12278:2007 |
BUYER'S GUIDE
Rope Access, Suspension Work and Rescue
Rope access, or industrial climbing, is a form of work positioning that uses ropes, pulleys, karabiners and rigging plates to reach difficult locations without scaffolding, cradles or aerial work platforms. Rope rescue is used in an emergency to retrieve a person who has fallen and is suspended in a harness.
- Use rope access only where traditional access systems cannot be installed, and always together with a fall protection system.
- Suspension work needs a full body harness with two attachment points, a primary for suspension and a secondary backup; the ventral (waist) points are best for suspension and a seat may be needed for long periods.
- Use anchor points rated to 12kN, or a tripod or davit system, for suspension work.
- Plan rescue before work starts: a rescue system must raise or lower the casualty with no free fall, and the rescuer needs a backup fall arrest system on anchors rated to 15 kN.
- Pre-assembled rope rescue kits give trained personnel a fast way to rescue a casualty from tower cranes, container cranes, wind turbines, ladders, lanyards, safety lines or inertia reels.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| Double Pulley with Two Side Attachment AFX206016 |
EN 12278:2007 | 437.0 gms±20 gms | — | This product |
| Aluminum Double Tandem Pulley, Big, with SS Sheaves AFX206004 |
EN 795:2012 Type B, EN 12278:2007 | 820.0 gms ± 20 gms | — | View |
| Single Pulley with One Side Attachment AFX206015 |
EN 12278:2007 | 264.0 gms±20 gms | — | View |
| Single Pulley with Three Attachments AFX206017 |
EN 12278:2007 | 328.0 gms±20 gms | — | View |
| Aluminum Double Tandem Pulley, Small, with SS Sheaves AFX206009 |
EN 795:2012 Type B, EN 12278:2007, ATEX 2014/34/EU | 820.0 gms ± 20 gms | — | View |
More in this family
Technical data from the manufacturer's catalogue, page 134. Specifications may change; please confirm with our team before ordering.
