Cross Arm Anchor Strap with D-Rings, 44 mm, 1.5 m
Code: AFA920015
EN 795:2012 Type BAS/NZS 5532:2013
A 1.5 m cross arm anchor strap made of 44 mm wide polyester webbing, with a small D-ring at one end and a bigger D-ring at the other. It is supplied with a back pad for added protection when used on sharp edges. Webbing anchor straps can be attached to concrete, steel or suitable structures that have a minimum rating of 15 kN.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Small D-ring at one end and bigger D-ring at the other
- Back pad for added protection on sharp edges
- For structures with a minimum rating of 15 kN
Technical specifications
| Material | 44 mm wide Polyester webbing |
|---|---|
| Length | 1.5 m |
| Attachment end | Small D-Ring at one end and a bigger D-Ring at other end |
| Breaking strength | 23 kN |
| Weight | 577.0 gms ± 10.0 gms |
| Standards | EN 795:2012 Type B, AS/NZS 5532:2013 |
BUYER'S GUIDE
Selecting a Safe Anchorage Point
The anchorage is the A in the ABCD of fall protection: the point on an independent structure that secures the fall protection device or lanyard. Anchor devices are classified under EN 795:2012 as Type A to E, and every anchor must be strong enough to hold a user in a fall.
- A single anchor point should be rated to at least 12kN for one person; for two people on one anchor the minimum is 21 kN, and no more than two people may use a single anchor.
- Attach at or above shoulder level and as directly overhead as possible, because a low or side anchor increases the fall distance and can cause a pendulum swing into obstacles.
- If unsure of the load rating, consult an engineer; good anchorages are I-beams and other solid fixtures, and you should never anchor to cable hangers, light fixtures or anything not designed for a sudden heavy load.
- Make sure the anchor is approved by the employer or an engineer and check it for damage before connecting; tag out a damaged anchor until a competent person has inspected it.
- Only authorised personnel may install and certify roofing anchors.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| Cross Arm Anchor Strap with D-Rings, 44 mm, 1.5 m AFA920015 |
EN 795:2012 Type B, AS/NZS 5532:2013 | 577.0 gms ± 10.0 gms | 1.5 m | This product |
| Webbing Anchor Strap with Textile Loops, 44 mm, 1.0 m AFA921010 |
EN 795:2012 Type B, EN 566:2017, AS/NZS 5532:2013 | 205.0 gms ± 10.0 gms | 1.0 m | View |
| Webbing Anchor Strap, 20 mm, 1.5 m AFA921515 |
EN 795:2012 Type B, EN 566:2017, AS/NZS 5532:2013 | 165.0 gms ± 10.0 gms | 1.5 m | View |
| Webbing Anchor Strap with Textile Loops, 44 mm, 0.5 m AFA921005 |
EN 795:2012 Type B, EN 566:2017, AS/NZS 5532:2013 | 128.0gms ± 10.0 gms | 0.5 m | View |
| HotWorX Welders Cross Arm Strap, Para-Aramid, 1.5 m AFA927015 |
EN 795:2012 Type B, ISO 9150:1988, EN ISO 15025:2002 | 260.0 gms ± 10.0 gms | 1.5 m | View |
More in this family
Technical data from the manufacturer's catalogue, page 119. Specifications may change; please confirm with our team before ordering.
