Ascender Handle (Left), 10-12 mm Rope
Code: AFX204002
EN 567:2013 Type 2 Class AEN 12841:2006 Type C
A left-hand ascender handle in aluminum alloy with a soft thermoplastic handle, used during ascent and occasionally for hauling. It works on 10.0mm to 12.0mm diameter kernmantle rope.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Soft thermoplastic handle
- For ascent and occasional hauling
- Spring lever locks the rope; karabiner prevents the rope from slipping out
- Anodizing colours may vary
Technical specifications
| Material | Aluminum Alloy; Soft thermo plastic handle |
|---|---|
| Works on | 10.0mm to 12.0mm dia Kernmantle Rope |
| Finish | Coloured, Anodized |
| Net weight | 196.0 gms ± 10 gms |
| Standards | EN 567:2013 Type 2 Class A, EN 12841:2006 Type C |
Used in
Ascent on ropeHauling
BUYER'S GUIDE
Rope Access, Suspension Work and Rescue
Rope access, or industrial climbing, is a form of work positioning that uses ropes, pulleys, karabiners and rigging plates to reach difficult locations without scaffolding, cradles or aerial work platforms. Rope rescue is used in an emergency to retrieve a person who has fallen and is suspended in a harness.
- Use rope access only where traditional access systems cannot be installed, and always together with a fall protection system.
- Suspension work needs a full body harness with two attachment points, a primary for suspension and a secondary backup; the ventral (waist) points are best for suspension and a seat may be needed for long periods.
- Use anchor points rated to 12kN, or a tripod or davit system, for suspension work.
- Plan rescue before work starts: a rescue system must raise or lower the casualty with no free fall, and the rescuer needs a backup fall arrest system on anchors rated to 15 kN.
- Pre-assembled rope rescue kits give trained personnel a fast way to rescue a casualty from tower cranes, container cranes, wind turbines, ladders, lanyards, safety lines or inertia reels.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| Ascender Handle (Left), 10-12 mm Rope AFX204002 |
EN 567:2013 Type 2 Class A, EN 12841:2006 Type C | 196.0 gms ± 10 gms | — | This product |
| Ascender Handle (Right), 10-12 mm Rope AFX204001 |
EN 567:2013 Type 2 Class A, EN 12841:2006 Type C | 196.0 gms ± 10 gms | — | View |
| Ventral Blocker, 10-12 mm Rope AFX204101 |
EN 567:2013, EN 12841:2006 Type B | 185 gms | — | View |
More in this family
Technical data from the manufacturer's catalogue, page 137. Specifications may change; please confirm with our team before ordering.
