Top & Wall Mount Ladder Bracket
Code: AFA930123
EN 795:2012 Type BAS/NZS 5532:2013
A bracket that provides a secure anchorage point for portable ladders, minimizing movement and improving worker stability while accessing elevated areas. Suitable for permanent roof or wall mount installation.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Secure anchorage point for portable ladders
- Minimizes ladder movement and improves worker stability
- Permanent roof or wall mount installation
Technical specifications
| Material | Bracket: High Strength Steel, Powder Coated; Karabiner: Aluminum 15 kN; Wire Cable: PVC Coated SS Wire |
|---|---|
| Breaking strength | 15 kN |
| Weight | 4.20 kg ± 10.0 gms |
| Standards | EN 795:2012 Type B, AS/NZS 5532:2013 |
Used in
Portable ladder access to roofs and walls
BUYER'S GUIDE
Selecting a Safe Anchorage Point
The anchorage is the A in the ABCD of fall protection: the point on an independent structure that secures the fall protection device or lanyard. Anchor devices are classified under EN 795:2012 as Type A to E, and every anchor must be strong enough to hold a user in a fall.
- A single anchor point should be rated to at least 12kN for one person; for two people on one anchor the minimum is 21 kN, and no more than two people may use a single anchor.
- Attach at or above shoulder level and as directly overhead as possible, because a low or side anchor increases the fall distance and can cause a pendulum swing into obstacles.
- If unsure of the load rating, consult an engineer; good anchorages are I-beams and other solid fixtures, and you should never anchor to cable hangers, light fixtures or anything not designed for a sudden heavy load.
- Make sure the anchor is approved by the employer or an engineer and check it for damage before connecting; tag out a damaged anchor until a competent person has inspected it.
- Only authorised personnel may install and certify roofing anchors.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
More in this family
Technical data from the manufacturer's catalogue, page 118. Specifications may change; please confirm with our team before ordering.
