Steel Tower Hook, 50 mm Gate Opening
Code: AFC608100
EN 362:2004 Class B
A large-opening steel tower hook with a 50.0 mm gate opening for connecting to large structural members. It is made of alloy steel, galvanized with silver passivation, with a breaking strength of 23 kN.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Zinc electroplated for extended corrosion resistance
- 100% proof load tested at 16 kN
- Passes 72-hour neutral salt-spray test without red rust
Technical specifications
| Material | Alloy Steel |
|---|---|
| Gate opening | 50.0 mm |
| Breaking strength | 23 kN |
| Finish | Galvanized with Silver passivation |
| Net weight | 725.0 gm ± 10.0 gm |
| Standards | EN 362:2004 Class B |
BUYER'S GUIDE
Connectors, Karabiners and Hooks
A connector links the parts of a fall arrest system, either as an anchorage connector at the anchor end of the connecting element or as a harness attachment connector at the harness end. A safe system has no weak link, so connectors must be chosen, used and checked with the same care as the rest of the equipment.
- KStrong hooks and connectors have a minimum breaking strength of 20 kN, and load bearing metal parts are proof load tested at 16 kN.
- To connect, unscrew or press open the lock, open the gate, and always lock the gate once connected.
- Screw locking karabiners are reliable in harsh or dirty conditions and lock manually with a threaded nut over the gate.
- Before every use, look over the connector for cuts, kinks or deformities, check that the gate opens, closes and locks smoothly and sits in line with the body, and check the marking and any rust on the gate and lock.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
More in this family
Technical data from the manufacturer's catalogue, page 162. Specifications may change; please confirm with our team before ordering.
