LS2395 Tie Bar MCB Lockout, No Hole Required, Multi-Pole
Code: LS2395
Tie bar miniature circuit breaker lockout LS2395 made of engineering plastic strengthened nylon PA, for MCBs of more than 2 poles; no holes in the breaker are required. It can lock the MCB in the OFF position only, installs easily without tools and accepts a padlock with a shackle up to 9/32" (7.5 mm). A circuit breaker lockout holds the breaker handle in a fixed position, typically OFF, and is secured with a padlock so the circuit cannot be switched during maintenance.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Tie bar lockout, no holes in the breaker required
- For multi-pole MCB (more than 2P), OFF position only
- Engineering plastic strengthened nylon PA
- Installs easily, no tools needed
- Accepts padlock shackles up to 9/32" (7.5 mm)
Technical specifications
| Breaker type | Multi-pole MCB (more than 2P) |
|---|---|
| Lock position | OFF only |
| Max padlock shackle diameter | 9/32" (7.5 mm) |
| Dimensions | 33 x 13 mm |
| Material | Engineering plastic strengthened nylon PA |
| Installation | No tools required |
| Weight | 20 g |
Used in
Electrical panels and distribution boardsIsolation of circuit breakers during maintenance
BUYER'S GUIDE
Choosing a Circuit Breaker Lockout
A circuit breaker lockout holds the breaker toggle in the OFF position so it cannot be switched on while work is under way. Fit depends on the breaker type, size and toggle shape.
- Identify the breaker first: miniature (MCB), moulded case (MCCB) or large industrial, single or multi-pole, and the toggle width and thickness.
- Pin-in and pin-out types fit the holes beside the toggle; clamp-on types grip the toggle itself and suit breakers without holes.
- Tool-free designs are quicker to fit; screw-fixed designs hold more firmly on large breakers.
- A lockout device does not replace verification. After locking, test that the circuit is de-energised before work starts.
Summarised from the manufacturer's catalogue and the general requirements for lockout devices in OSHA 29 CFR 1910.147. Device selection must follow your written energy isolation procedure and site risk assessment.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| LS2395 Tie Bar MCB Lockout, No Hole Required, Multi-Pole LS2395 |
— | 20 g | — | This product |
| LS3395 MCB Circuit Breaker Lockout, Nylon with Brass Locking Screw LS3395 |
— | — | — | View |
| LS2390 Miniature Circuit Breaker Lockout, Pin out standard LS2390 |
— | 7 g | — | View |
| LS2393 Miniature Circuit Breaker Lockout, Pin out wide LS2393 |
— | 7 g | — | View |
| LS2391 Miniature Circuit Breaker Lockout, Pin in standard LS2391 |
— | 7 g | — | View |
More in this family
Technical data from the manufacturer's catalogue, page 15. Specifications may change; please confirm with our team before ordering.
