Confined Space · AFT751080
Illustration of the product family. Product photos will follow; ask our team if you need a picture or the datasheet.
Extendable Pole Hoist Davit with Flange Anchor Bracket
Code: AFT751080
EN 795:2012 Type BAS/NZS 5532:2013ATEX 2014/34/EU
A davit system for vertical and horizontal confined space entries where limited height or the entry layout rules out a regular anchorage system. It has three adjustment points for low anchor positions, a swivel at the end of the boom and swivel pads at the base for stability. Pre-installed brackets accept KStrong winches, and the supplied anchor point AFT730013 gives access to side entry vessels and tanks.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Three adjustment points for locations with a low anchor point
- Inbuilt swivel at the end of the upper mast offset (boom)
- Boom with three adjustable height positions
- Swivel pads at the base for balance and stability
- Pre-installed brackets for KStrong winches AFT730020, AFT730040, AFT730042, AFT730120 and AFT730135
- Works with retrieval blocks AFS510020R and AFS510030R via mounting bracket AFT710007UR
- For vertical and horizontal confined space entries
- Supplied with anchor point AFT730013 for side entry vessels and tanks
Technical specifications
| Material | High strength and durable Aluminum Alloy |
|---|---|
| Maximum load capacity | 500 kg (for Confined Space Rescue); 250 kg (for Material Lifting as per Machine Directive) |
| Finish | Powder Coated |
| System strength | 15 kN |
| Reach from column (upper/middle/lower) | 1.240 m / 1.520 m / 1.750 m |
| Arm height (upper/middle/lower) | 2.540 m / 2.140 m / 1.320 m |
| Included | Flange Anchor Bracket AFT730013 |
| Compatible winches | AFT730020, AFT730040, AFT730042, AFT730120, AFT730135 |
| Mounting brackets | AFT710007UR (to be purchased separately) |
| Weight | 13.19 kg ± 0.10 kg |
| Standards | EN 795:2012 Type B, AS/NZS 5532:2013, ATEX 2014/34/EU |
Used in
Side entry vessels and tanksVertical and horizontal confined space entry
BUYER'S GUIDE
Confined Space Entry and Retrieval
Confined spaces have limited openings for entry and exit, such as storage tanks, process vessels, ship compartments, pits, silos, sewers, boilers, tunnels and pipelines. Davits, tripods and winches provide the overhead anchorage and the means to lower, lift and retrieve workers safely.
- Make sure the tripod or davit is correctly installed, fitted, suitably rated and certified before entry.
- Before use, inspect the confined space harness, the Type 3 rescue retrieval SRL, the inertia reel and the rescue winch.
- Use a full body confined space harness with a rear fall arrest point and shoulder confined space loops; with a spreader bar, use the arm straps.
- A rescue winch used for personnel must be backed up by a fall arrest block.
- Have a rescue plan in place and keep rescue equipment available for the whole time work is under way.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| Extendable Pole Hoist Davit with Flange Anchor Bracket AFT751080 |
EN 795:2012 Type B, AS/NZS 5532:2013, ATEX 2014/34/EU | 13.19 kg ± 0.10 kg | — | This product |
| Extreme H-Base Davit Arm System AFT751011 |
EN 795:2012 Type B, AS/NZS 5532:2013, ATEX 2014/34/EU | 64.12 kg ± 0.10 kg | — | View |
| Modular Davit Arm with Floor Mount Base AFT751021 |
EN 795:2012 Type A, AS/NZS 5532:2013, ATEX 2014/34/EU | 44.49 kg (Davit Weight); 9.38 kg (Floor Mount Base Weight) | — | View |
| Modular Davit Arm with Wall Mount Base AFT751031 |
EN 795:2012 Type A, AS/NZS 5532:2013, ATEX 2014/34/EU | 44.44 kg (Davit Weight); 9.97 kg (Wall Mount Base Weight) | — | View |
| Hitch Mounting Davit for 2 in Vehicle Hitch Receiver AFT751085 |
EN 795:2012 Type B, AS/NZS 5532:2013 | 56.54 kg | — | View |
| Modular Davit Arm AFT751041 |
EN 795:2012 Type B, AS/NZS 5532:2013, ATEX 2014/34/EU | 44.44 kg | — | View |
| Dead Weight Davit with 650 kg Counterweight Trolley AFT751090 |
EN 795:2012 Type B | 750kg ± 0.20 kg including 650kg dead weight | — | View |
| KStrong Extreme Davit, Stainless Steel AFT7500 |
EN 795:2012 Type A, AS/NZS 5532:2013, ATEX 2014/34/EU | Cantilever Arm: 15.9 kg; Boom Upright: 19.2 kg; Floor mount Base: 9.38 kg; Wall Mount Base: 9.97 kg; Concrete Sleeve Insert: 2.02 kg | — | View |
More in this family
Technical data from the manufacturer's catalogue, page 128. Specifications may change; please confirm with our team before ordering.
