Beam Trolley Anchor, Flange Width 80 mm to 250 mm
Code: AFA930412
EN 795:2012 Type BATEX 2014/34/EUANSI Z359.18-2017 Type A
A movable anchorage point that travels along the length of the beam on which it is mounted, moving with the user. Its adjustable flanges fit different beam sizes and its wheels give very smooth movement over the beam. Highly corrosion resistant and easy to install.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Movable anchorage point that travels along the beam with the user
- Allows continuous safe anchorage across the length of the beam
- Adjustable flanges for different beam sizes
- Wheels give extremely smooth movement over the beam
- Highly corrosion resistant and easy to install
Technical specifications
| Material | Aluminum Alloy and Stainless steel |
|---|---|
| Minimum breaking strength | 23 kN |
| Flange width | 80.0 mm to 250.0 mm |
| Weight | 3.9 kg ± 0.01 kg |
| Standards | EN 795:2012 Type B, ATEX 2014/34/EU, ANSI Z359.18-2017 Type A |
BUYER'S GUIDE
Selecting a Safe Anchorage Point
The anchorage is the A in the ABCD of fall protection: the point on an independent structure that secures the fall protection device or lanyard. Anchor devices are classified under EN 795:2012 as Type A to E, and every anchor must be strong enough to hold a user in a fall.
- A single anchor point should be rated to at least 12kN for one person; for two people on one anchor the minimum is 21 kN, and no more than two people may use a single anchor.
- Attach at or above shoulder level and as directly overhead as possible, because a low or side anchor increases the fall distance and can cause a pendulum swing into obstacles.
- If unsure of the load rating, consult an engineer; good anchorages are I-beams and other solid fixtures, and you should never anchor to cable hangers, light fixtures or anything not designed for a sudden heavy load.
- Make sure the anchor is approved by the employer or an engineer and check it for damage before connecting; tag out a damaged anchor until a competent person has inspected it.
- Only authorised personnel may install and certify roofing anchors.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
More in this family
Technical data from the manufacturer's catalogue, page 111. Specifications may change; please confirm with our team before ordering.
