Beam Anchor (Mini), Flange Width 75 mm to 150 mm
Code: AFA930411
EN 795:2012 Type BANSI Z359.18-2017 Type AATEX 2014/34/EU
A temporary, transportable anchor device that provides an anchorage point when attached onto a beam, without penetrating it. The arm has brass flanges that adjust to beam flange widths from 75mm to 150mm. Once installed, the D-ring on the aluminum bar accepts a variety of connectors.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Temporary transportable anchor device attached onto a beam without penetrating it
- Brass flanges on the arm, adjustable to suit different beam sizes
- D-ring on the aluminum bar for connection with a variety of connectors
- ATEX 2014/34/EU certified
Technical specifications
| Material | Aluminum Alloy & Brass |
|---|---|
| Minimum breaking strength | 23 kN |
| Flange width | 75mm to 150mm |
| Weight | 1.56 kg ± 0.01 kg |
| Standards | EN 795:2012 Type B, ANSI Z359.18-2017 Type A, ATEX 2014/34/EU |
BUYER'S GUIDE
Selecting a Safe Anchorage Point
The anchorage is the A in the ABCD of fall protection: the point on an independent structure that secures the fall protection device or lanyard. Anchor devices are classified under EN 795:2012 as Type A to E, and every anchor must be strong enough to hold a user in a fall.
- A single anchor point should be rated to at least 12kN for one person; for two people on one anchor the minimum is 21 kN, and no more than two people may use a single anchor.
- Attach at or above shoulder level and as directly overhead as possible, because a low or side anchor increases the fall distance and can cause a pendulum swing into obstacles.
- If unsure of the load rating, consult an engineer; good anchorages are I-beams and other solid fixtures, and you should never anchor to cable hangers, light fixtures or anything not designed for a sudden heavy load.
- Make sure the anchor is approved by the employer or an engineer and check it for damage before connecting; tag out a damaged anchor until a competent person has inspected it.
- Only authorised personnel may install and certify roofing anchors.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| Beam Anchor (Mini), Flange Width 75 mm to 150 mm AFA930411 |
EN 795:2012 Type B, ANSI Z359.18-2017 Type A, ATEX 2014/34/EU | 1.56 kg ± 0.01 kg | — | This product |
| Beam Anchor, Flange Width 90 mm to 340 mm AFA930401 |
EN 795:2012 Type B, ANSI Z359.18-2017 Type A, ATEX 2014/34/EU | 1.87 kg ± 0.01 kg | — | View |
| Vertical Beam Anchor, Flange Width 90 mm to 340 mm AFA930413 |
EN 795:2012 Type B | 2.62kg± 0.02kg | — | View |
More in this family
Technical data from the manufacturer's catalogue, page 110. Specifications may change; please confirm with our team before ordering.
