Anchor Bolt with D-Ring, M16
Code: AFA930316
EN 795:2012 Type AANSI Z359.1-2007AS/NZS 5532:2013
An alloy steel anchor that is easily installed on concrete and metal structures with M16 chemical or mechanical fasteners. The D-ring serves as the anchor point, and the anchor has a breaking strength of 44 kN.
Prices are sent in a quotation once you submit your cart, adjusted to your quantity and delivery location.
Key features
- Installs on concrete and metal structures with M16 chemical or mechanical fasteners
- D-ring can be used as an anchor point
Technical specifications
| Material | Alloy Steel |
|---|---|
| Breaking strength | 44 kN |
| Finish | Shot blasted and blue passivation |
| Weight | 280.0 gms ± 20.0 gms |
| Standards | EN 795:2012 Type A, ANSI Z359.1-2007, AS/NZS 5532:2013 |
BUYER'S GUIDE
Selecting a Safe Anchorage Point
The anchorage is the A in the ABCD of fall protection: the point on an independent structure that secures the fall protection device or lanyard. Anchor devices are classified under EN 795:2012 as Type A to E, and every anchor must be strong enough to hold a user in a fall.
- A single anchor point should be rated to at least 12kN for one person; for two people on one anchor the minimum is 21 kN, and no more than two people may use a single anchor.
- Attach at or above shoulder level and as directly overhead as possible, because a low or side anchor increases the fall distance and can cause a pendulum swing into obstacles.
- If unsure of the load rating, consult an engineer; good anchorages are I-beams and other solid fixtures, and you should never anchor to cable hangers, light fixtures or anything not designed for a sudden heavy load.
- Make sure the anchor is approved by the employer or an engineer and check it for damage before connecting; tag out a damaged anchor until a competent person has inspected it.
- Only authorised personnel may install and certify roofing anchors.
Summarised from the manufacturer's catalogue. Selection must follow your site risk assessment and the competent person's judgement.
Compare similar products
| Product | Standards | Weight | Length | |
|---|---|---|---|---|
| Anchor Bolt with D-Ring, M16 AFA930316 |
EN 795:2012 Type A, ANSI Z359.1-2007, AS/NZS 5532:2013 | 280.0 gms ± 20.0 gms | — | This product |
| Single Point Anchor, Forged Stainless Steel, 45 kN AFA930001SS |
EN 795:2012 Type A, TS 16415:2013 Type A, ANSI Z359.18-2017 Type A, AS/NZS 5532:2013 | 380.0 gms ± 10.0 gms | — | View |
| SS Abseiling Anchor, Forged Stainless Steel, 40 kN AFA930002 |
EN 795:2012 Type A, TS 16415:2013 Type A, AS/NZS 5532:2013 | 223.0 gms ± 10.0 gms | — | View |
More in this family
Technical data from the manufacturer's catalogue, page 115. Specifications may change; please confirm with our team before ordering.
